Bianco INOX45S2MPCX Domestic Pump

Description

Bianco INOX45S2MPCX Domestic Pump

The pump is a self-priming surface mounted pressure system pump supplied with plug and play leads (IEC type). The self-priming ability provides excellent suction capacity of up to 9m. Used especially for supplying water to domestic installations.

The pump is characterised by:

• Automatic electronic pump control fitted and wired with plug and play leads so a licensed electrician is not required during installation.
• Includes fully electronic pump controller for automatic pump starting, stopping and restart after power loss and water loss.
• Run dry protection to prevent pump damage
• Automatic electronic control has in-built check valve to prevent water backflow through the pump.
• 2.2bar pump cut in for greater versatility.
• Corrosion resistant pump body, diffuser and impeller to ensure pump durability
• High quality mechanical shaft seal and high quality bearings
• 240V single phase TEFC motor with in-built auto reset thermal overload to prevent the pump from overheating.

Applications

• Used especially for supplying water to domestic installations and applications where a suction lift is required.

Package Information

• 11 kg
• L 420mm x W 230mm x H 460mm

Motor / power: 450W
Max. flow: 50T/min
Taps: 4 taps (calculated at 8lt/min)
Head: 38m
Suction hose diameter: 1″ / 25mm
Pressure: 380kPa
Body: Stainless Steel
Impeller: Technopolymer
Mechanical Seal : Carbon/Ceramic/Nitrile
Warranty on pump: 2 Years

AS/NZS 4020 Drinking Water Approved.

INOX45S2MPCX Electrical data:

• Rated voltage: 240V
• Mains frequency: 50 Hz
• Current: 3.5 amps
• Rated Output: 450W
• Capacitor: 10 uF
• Motor duty: Continuous
• Motor type: Asynchronous, TEFC
• Motor protection: In-built thermal overload
• Ingress protection: IP X4
• Insulation class: F
• Power cable length: 2 m H05 3G1.0
• Net weight: 11 kg
• Liquid: Clean water temperature range: 2 – 40 °C
• Materials: Pump body, Diffuser, Impeller: Stainless Steel, Technopolymer.
• Mechanical seal: Carbon/Ceramic/ Nitrile,
• O rings: Nitrile
• Installation: Maximum ambient temperature: 40 °C
• Maximum operating pressure: 6 bar
• Dimensions: 420mm x 460mm x 230mh